Available in standard and safety  models with pistol, lever, button or bent tip activation. All have 1/4" female NPT inlet and are constructed with a die-cast body and include a hang-up hook.

All have 1/4" Female NPT inlet. Allows full line pressure to be used.
Important: To comply with OSHA regulations Standard Blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.

10" Clip-On Blowgun

• 18-139  Chuck style. Converts standard ball foot air chuck into a blowgun.  Convenient and easy to use. 12/box.
• 18-139-07  Bulk. 100/box.

Button Type

• 18-200  Combination finger guard and/or hang-up hook. New, compact one piece nozzle.

Lever Type

• 18-203  Comfortable thumb lever valve control with handy hanger hole in lever and hanger hook. New, compact one piece nozzle.
• 18-202  Bulk. 1/box.
• 18-202-07 Bulk. 125/box.

Pocket-Size Blowgun with 4" Bent Rubber Tip

• 18-205  Ideal for cleaning automatic transmissions, fuel lines, oil passages and carburetors. Oil resistant, soft rubber tip provides a leakproof seal. 4" bent extension for easier access into hard to reach areas.

Standard Blowgun with Rubber Tip

• 18-207  Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Gives a leakproof seal against oil passages, fuel lines, etc., when air pressure is needed for cleaning.
• 18-206  Bulk. 1/box.
• 99-005  Replacement Tip for 18-207 Blowgun.

Flex-Tipped Blowgun

• 18-212  No handles, levers or buttons. Simply flex rubber nozzle to open, release, and air shuts off automatically.

Siphon Spray Blowgun

• 18-221  Combination of a Standard Blowgun and the Siphon Spray Nozzle.  Barbed siphon inlet fits 1/4" ID hose or tubing. Use for spray-cleaning engines, applying protective coatings, etc.
• 18-220  Bulk. 1/box.

Deluxe Blowgun Kit

• 18-241  Complete, all purpose blowgun with four interchangeable nozzles for cleaning and inflating. Perfect for blowing sawdust and grass clippings, drying surfaces or inflating balls, rafts and air mattresses. Complete with:
  Standard Nozzle, Rubber Tip Nozzle, Tapered Inflator Nozzle and Ball Inflator Needle. All nozzles packed for storage in a convenient see-thru plastic case.
• 18-241-07  Bulk. 100/box.

Pocket-Size Blowgun with Rubber Tip

• 18-311  Non-restricted pressure blowgun with a rubber tip nozzle. Seals tight where air pressure is required, such as fuels, air passages, carburetors, and automatic transmissions. Heavy duty aluminum die cast body with hang-up hook. 1/4" NPT female inlet.
• 18-311-02  Rubber Tip Replacement Nozzle.
• 18-311-07  Bulk Gun. 100/box.

Pocket-Size Blowgun with 5/16" Nozzle

• 18-312  Non-restricted blowgun with a 5/16" nozzle. Convenient, compact blowgun has a comfortable aluminum die cast body and hang-up hook.  1/4" NPT female inlet.

Pocket-Size Blowgun with 9-7/8" Extension

• 18-316  Non-restricted blowgun with a 9-7/8" nozzle. Comfortable lever blowgun with a 9-7/8" nozzle extension for long reach applications.  Aluminum die cast body with handy hang up hook. 1/4" NPT female inlet.

Pistol-Grip Blowgun

• 18-325  Lightweight plastic pistol grip blowgun with ergonomic design reduces user fatigue. Brass valving and bushing ensure long life.

New improved nozzle gives greatly increased performance and yet still meets OSHA regulation 100-1 for 30 PSI “dead head” pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet.

Button Type

• 18-230  Inlet Pressure 150 PSI.
• 18-231  Inlet Pressure 150 PSI.

Lever Type

• 18-232  Inlet Pressure 150 PSI.
• 18-233  Inlet Pressure 150 PSI.

Pocket Size Lever Type

• 18-319  Inlet Pressure 150 PSI.

Pocket Size with Vented Extensions

• 18-302  Inlet Pressure 150 PSI. With 4" extension.
• 18-308  Inlet Pressure 150 PSI. With 6-1/8" extension.
  18-308-07  Bulk. 100/box.

Clip-On Safety BlowgunChuck style. Converts standard ball foot air chuck into a blowgun.  Convenient and easy to use.

• 18-143  8 1/2" Clip-On. 10/Box
• 18-143-07 8 1/2" Clip-On. 50/Box
• 18-145  3" Clip-On.

High Volume “Venturi” Action

• 18-208  Delivers more air to speed cleaning and drying while using less compressed air. Special venturi nozzle increases air flow to part, yet meets OSHA regulation 100-1. Convenient hang hole, comfortable lever and 1/4" NPT female inlet. 150 PSI inlet pressure.

Safety Blowgun with Rubber & Safety Nozzles

• 18-215  Oil resistant, soft rubber tip seals tight and won’t mar finishes. Ideal for cleaning fuel lines, air passages and carburetors. With safety nozzle connected, limits air pressure to 30 PSI, meeting OSHA safety standards.  Convenient hang hole, comfortable lever and 1/4" NPT female inlet. 150 PSI inlet pressure.

Pocket-Size Blowgun with 7/8" Nozzle

• 18-300  Safety blowgun conforms to OSHA Dir. 100-1 on noise levels and nozzle pressure. Nozzle restricts pressure to maximum 30 PSI at tip when used with 150 PSI inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or restricted. Heavy duty aluminum die cast body with hang-up hook. 1/4" NPT female inlet.  Replacement nozzles available.
• 18-300-07  Bulk. 150/box.

Pocket-Size Blowgun with 9-7/8" Nozzle

• 18-304  Safety blowgun conforms to OSHA Dir. 100-1 on noise levels and nozzle pressure. Nozzle restricts pressure to maximum 30 PSI at tip when used with 150 PSI inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or restricted. Heavy duty aluminum die cast body with hang-up hook. 1/4" NPT female inlet.

Pistol-Grip Blowgun

• 18-321  Comfortable pistol style blowgun is lightweight and easy to handle, plus has two 1/4" NPT female inlets. Makes the blowgun convenient for overhead or underbench air connections. Meets OSHA regulation 100-1.  Rugged die cast body, two finger trigger, hang hole and dual 1/4" NPT inlets.  150 PSI inlet pressure.

Pistol-Grip Spray Cleaner

• 18-225  Air-operated siphon cleaning gun handles most cleaning fluids. Ideal for mixing water or soap solutions for pressure cleaning of parts, engines, machinery, floors and walls. Lightweight, easy to handle. Dual air inlet makes for a handy connection from overhead or underbench floor air use. 1/4" Female NPT threads. Must be used on regulated air line with a pressure setting not to exceed 30 PSI. Includes 8 ft. of clear vinyl tubing with a weighted strainer screen and fluid control valve.  10" length spray nozzle.
• 18-224  Bulk. 1/box.

Siphon Spray Nozzle

• 18-405  For use on the 18-221 Blowgun. A spray nozzle and siphon head for spraying a combination of fluids and air. Fits any blowgun with 1/8" male pipe thread. Barbed fitting for use with 1/4" ID hose.
• 18-404  Bulk. 10/box.

Flex Tip 1/8" MNPT X8"

• 18-406  Flexible blowgun extension tip. 5/box.

The handiest personal blowguns on the market today. A must for home, shop or garage use. They’re quick and easy to use... Just twist knurled nozzle. Adjust from a whisper of air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy.  Complete with handy pocket clip. Attach to air line coupler.

Tru-Flate Design Adjustable Blowgun

• 18-601  Fits all Tru-Flate Design 1/4" coupler bodies.
• 18-598  Bulk. 10/box.

Industrial/Milton Design Adjustable Blowgun

• 18-603  Fits all Industrial/Milton Design 1/4" coupler bodies.
• 18-596  Bulk. 10/box.
• 18-603-07  Bulk 100/box.

Aro Design Adjustable Blowgun

• 18-605  Fits all Aro Design 1/4" coupler bodies.
• 18-604  Bulk. 10/box.

Replacement Nozzles for Pocket Size Blowguns only.

• 18-300-03  7/8" Replacement Safety Nozzle.
• 18-300-04  4" Replacement Safety Nozzle.
• 18-300-05  9-7/8" Replacement Safety Nozzle.
• 18-300-06  5/16" Standard Replacement Nozzle.
• 18-300-07  4" Standard Replacement Nozzle.
• 18-300-08  9-7/8" Standard Replacement Nozzle.
• 18-320-02  4" Rubber Tip Replacement Nozzle.

• 18-501  Corrosion resistant valve. Alkali, heat, oil and weather resistant. Valve opens by flexing the spout. Positive shut-off when released. 3/4" Female Garden Bibb thread.
• 18-498  Bulk. 10/box.
• 18-501-07  Bulk. 250/box.

Cast zinc, alkali resisting body, with oil and weather resistant rubber spout for long service life. Thumb lever water valve delivers maximum.

• 18-504  3/4" Female Garden Bibb.
• 18-506  1/4" Female NPT.